Difference between revisions of "User:Definitionofis"

From OpenCircuits
Jump to navigation Jump to search
m (Starting a new project Robot Weed Sprayer GPIO notes)
(Video of completed Dandelion Flower Weed Wand)
 
(13 intermediate revisions by 2 users not shown)
Line 12: Line 12:
  
 
=== [[Fridge Defrost Timer with Solar Trigger Option]] ===
 
=== [[Fridge Defrost Timer with Solar Trigger Option]] ===
The [https://vimeo.com/177809415 project video] shows a fridge timer which can be set to trigger during high battery voltage sunny days so the defrost cycle never uses valuable battery power. It is switchable to act like a regular defrost timer for long cloudy stretches of time, like winter.
+
The [https://vimeo.com/spinningwindmillfredhi project video] shows a fridge timer which can be set to trigger during high battery voltage sunny days so the defrost cycle never uses valuable battery power. It is switchable to act like a regular defrost timer for long cloudy stretches of time, like winter.
  
 
=== [[Solar panel rotator motor power with auto-shut-off]] ===
 
=== [[Solar panel rotator motor power with auto-shut-off]] ===
The [https://vimeo.com/48903056 project video] shows a way to power solar panel rotator motors from a solar panel, supplemented by a walladapter.
+
The [https://vimeo.com/spinningwindmillfredhi project video] shows a way to power solar panel rotator motors from a solar panel, supplemented by a walladapter.
  
 
=== [[Odroid XU4 Weeding Spraying Robot]] ===
 
=== [[Odroid XU4 Weeding Spraying Robot]] ===
This is a minor note about how to access pin 5 of CONN11, which is a 12 pin connector which was inaccessible using wiringPi library.
+
The [https://vimeo.com/spinningwindmillfredhi project video] shows the completed robot spraying weeds. I proved the prototype works, although it is impracticably slow.
I figured out how to use that undocumented pin because I needed one more gpio wire!
 
https://github.com/hardkernel/wiringPi
 
https://ameridroid.com/products/odroid-xu4
 
https://wiki.odroid.com/odroid-xu4/odroid-xu4
 
https://wiki.odroid.com/odroid-xu4/software/gpio_register_map#gpio_port_register_map
 
  
You can modify the C language file odroidxu3.c which has a placeholder filled with several -1 items as an error return code. The XU3 and XU4 both have 1 to 40 pins accessible from the Shifter Shield. I used all the GPIO (GPX) IN/OUT pins with success. That is the 40 pin connector. https://wiki.odroid.com/accessory/add-on_boards/xu4_shift_shield
+
=== [[Dandelion Flower Weed Wand]] ===
 +
The [https://estimator.com.de/file_download/8/marriotBottleWeedWandCompleted_externalPrinciple.mkv Weed Wand Prototype November 1, 2024] video shows the Weed Wand detecting flowers and dropping environmentally harmless vinegar to wilt dandelion flowers.
  
Here is the library wiringPi which I started with: https://github.com/hardkernel/wiringPi and you will find a file odroidxu3.c in there.
+
Weed Wand is faster and more accurate than manually aiming and pulling a trigger on a pressurized pump sprayer.
  
See the other 12 pin connector of the XU4. Pin 5 is a GPX3.2 IN/OUT pin. I will arbitrarily call it pin 45, as in 40 pins plus the 5th one on the other connector. The CPU register space sees it as mathematically adjacent to GPX3.1, which is pin 36, GPX3.1 and CONN11/pin 5 is GPX3.2. https://wiki.odroid.com/odroid-xu4/software/gpio_register_map#gpio_port_register_map
+
=== [[Li-ion battery discharge limiter]] ===
 +
I used a car booster battery to pump my car tires and it had no lower limit turn-off and it destroyed the Li-ion battery. I heard the air pump slow and I turned it off too late. This little device will do automatic flow-through and cut-off to protect the battery next time.
  
You can simply change one number from -1 to 34 without understanding why:
+
=== [[Temperature Difference Sensor and Switch for Solar Water Circulation Pump]] ===
 
+
This circuit uses two diodes as heat sensors to switch a circulation pump ON when the water on the roof solar water collector is hotter than the hot water storage tank in the house.
Change odroidxu3.c and recompile the library. Then you can simply do things like digitalWrite(45, 1); and pinMode (45, OUTPUT ) and instead of getting a return -1 error you will get proper success where previously the range of pins was 1 to 40.
 
 
 
Here is the change to odroidxu3.c See the number 34 in there, just below "//Not Used"? That was a -1. Change the -1 to a 34 and recompile. That is all you have to do. That 34 is in the 45th position thus pin 45.
 
 
 
static const int phyToGpio[64] = {
 
 
 
      // physical header pin number to native gpio number
 
      -1,            //  0
 
      -1,  -1,        //  1 |  2 : 3.3V, 5.0V
 
      209, -1,        //  3 |  4 : GPB3.2(I2C_1.SDA), 5.0V
 
      210, -1,        //  5 |  6 : GPB3.3(I2C_1.SCL), GND
 
      18, 172,        //  7 |  8 : GPX1.2, GPA0.1(UART_0.TXD)
 
      -1, 171,        //  9 | 10 : GND, GPA0.0(UART_0.RXD)
 
      174,173,        // 11 | 12 : GPA0.3(UART_0.CTSN), GPA0.2(UART_0.RTSN)
 
      21,  -1,        // 13 | 14 : GPX1.5, GND
 
      22,  19,        // 15 | 16 : GPX1.6, GPX1.3
 
      -1,  23,        // 17 | 18 : 3.3V, GPX1.7
 
      192, -1,        // 19 | 20 : GPA2.7(SPI_1.MOSI), GND
 
      191, 24,        // 21 | 22 : GPA2.6(SPI_1.MISO), GPX2.0
 
      189,190,        // 23 | 24 : GPA2.4(SPI_1.SCLK), GPA2.5(SPI_1.CSN)
 
      -1,  25,        // 25 | 26 : GND, GPX2.1
 
      187,188,        // 27 | 28 : GPA2.2(I2C_5.SDA), GPA2.4(I2C_5.SCL)
 
      28,  -1,        // 29 | 30 : GPX2.4, GND
 
      30,  29,        // 31 | 32 : GPX2.6, GPX2.5
 
      31,  -1,        // 33 | 34 : GPX2.7, GND
 
      -1,  33,        // 35 | 36 : PWR_ON(INPUT), GPX3.1
 
      -1,  -1,        // 37 | 38 : ADC_0.AIN0, 1.8V REF OUT
 
      -1,  -1,        // 39 | 40 : GND, AADC_0.AIN3
 
 
 
      // Not used  (August 2, 2019, add pin 45 to be pin 5 of CON11 Odroid Shifter Shield XU4
 
      -1, -1,
 
      -1, -1,
 
      34, -1, // pin 5 of CONN11 GPX3.2(#34) wiki.odroid.com/odroid-xu4/hardware/expansion_connectors#gpio_map_for_wiringpi_library_con10_2_x_15
 
      -1, -1, // 41...48
 
      -1, -1,
 
      -1, -1,
 
      -1, -1,
 
      -1, -1, // 49...56
 
      -1, -1,
 
      -1, -1,
 
      -1, -1,
 
      -1      // 57...63
 
 
 
};
 
 
 
I am using Phys mode. I never tested other modes.
 

Latest revision as of 09:33, 1 November 2024

MPPT Solar and Wind Power Boost Charge Controller

This is an analogue computer with a digital option. It is an elegant, unique idea for MPPT. I have some documentation videos and circuit inside the link. The circuit works but I never used it much because my wind turbine project stalled. I am back: April 2016.

Sun Tracker or Irrigation Timer to drive motors

This is using two LEDs to sense the sun and send +- or -+ logic signals to a full bridge motor driver. You could also use this circuit to turn on an irrigation motor for a very short time every several hours.

Wireless remote switch, button press: 1 second=ON, 3 seconds=OFF

My solar power has to be manually switched to city power at sunset in my basement. I made this wireless upstairs button, instead of running a long 120vac wire to an upstairs switch.

Fridge Defrost Timer with Solar Trigger Option

The project video shows a fridge timer which can be set to trigger during high battery voltage sunny days so the defrost cycle never uses valuable battery power. It is switchable to act like a regular defrost timer for long cloudy stretches of time, like winter.

Solar panel rotator motor power with auto-shut-off

The project video shows a way to power solar panel rotator motors from a solar panel, supplemented by a walladapter.

Odroid XU4 Weeding Spraying Robot

The project video shows the completed robot spraying weeds. I proved the prototype works, although it is impracticably slow.

Dandelion Flower Weed Wand

The Weed Wand Prototype November 1, 2024 video shows the Weed Wand detecting flowers and dropping environmentally harmless vinegar to wilt dandelion flowers.

Weed Wand is faster and more accurate than manually aiming and pulling a trigger on a pressurized pump sprayer.

Li-ion battery discharge limiter

I used a car booster battery to pump my car tires and it had no lower limit turn-off and it destroyed the Li-ion battery. I heard the air pump slow and I turned it off too late. This little device will do automatic flow-through and cut-off to protect the battery next time.

Temperature Difference Sensor and Switch for Solar Water Circulation Pump

This circuit uses two diodes as heat sensors to switch a circulation pump ON when the water on the roof solar water collector is hotter than the hot water storage tank in the house.