Difference between revisions of "Wirewrap"

From OpenCircuits
Jump to navigation Jump to search
m (Protected "Wirewrap": spam magnet [edit=autoconfirmed:move=autoconfirmed] (expires 13:56, 4 May 2008 (UTC)))
(mondel)
Line 1: Line 1:
 +
roliroleltch
 
Wire-wrapping is a method of wiring through-hole components together on a board.
 
Wire-wrapping is a method of wiring through-hole components together on a board.
 
It is usually used only for prototyping.
 
It is usually used only for prototyping.

Revision as of 07:22, 15 July 2008

roliroleltch Wire-wrapping is a method of wiring through-hole components together on a board. It is usually used only for prototyping.

A manual wire-wrap tool is cylindrical with one large on-axis hole (for the pin to be connected) and an off-axis hole (for the wire - usually 30 gauge). Rotating this tool leaves a tightly-wound helix of wire on the pin. There are also powered tools with motors that work the same way.

Wirewrap is one of several circuit construction techniques.