Difference between revisions of "Techniques"
(reflow oven) |
(perfboard types) |
||
Line 9: | Line 9: | ||
== Construction techniques == | == Construction techniques == | ||
+ | |||
+ | "solderless breadboard" is the fastest construction technique ... but it is very fragile. | ||
Dead bug style. Manhattan style. Veroboard. Perfboard and point-to-point. Solderless protoboard. | Dead bug style. Manhattan style. Veroboard. Perfboard and point-to-point. Solderless protoboard. | ||
+ | |||
+ | traditional perfboards with holes on a 0.1" grid (2.54 mm grid) come in 3 styles: | ||
+ | * just holes in insulator | ||
+ | * little donuts of copper around each hole, usually plated-through (See [http://barello.net/Robots/minisumo/index.htm this robot controller] for an example) | ||
+ | * solid sheets of copper, usually with a little donut gap around each hole. | ||
+ | |||
+ | The best one to use is ... | ||
+ | |||
+ | With these perfboards, there's 2 ways to connect wires so they don't fall off: | ||
+ | * wire wrap, or | ||
+ | * solder. | ||
== Soldering techniques == | == Soldering techniques == |
Revision as of 15:36, 8 March 2006
Contents
Circuit board techniques
Toner transfer, Press-and-Peel(tm), photoresist, Sharpie, nail polish.
Ferric chloride vs. ammonium persulfate. How to dispose of etchant.
Commercial PCB fabrication. Vendors.
?
Construction techniques
"solderless breadboard" is the fastest construction technique ... but it is very fragile.
Dead bug style. Manhattan style. Veroboard. Perfboard and point-to-point. Solderless protoboard.
traditional perfboards with holes on a 0.1" grid (2.54 mm grid) come in 3 styles:
- just holes in insulator
- little donuts of copper around each hole, usually plated-through (See this robot controller for an example)
- solid sheets of copper, usually with a little donut gap around each hole.
The best one to use is ...
With these perfboards, there's 2 ways to connect wires so they don't fall off:
- wire wrap, or
- solder.
Soldering techniques
How to use a soldering iron. What is flux for?
Hot air soldering. Huh?
Hobby replacements for commercial reflow: skillet soldering, toaster-oven soldering, soldering using an oil lamp or candle.
- the "Reflow Skillet" tutorial
- "Easy Reflow: Build an SMT Reflow Oven Controller" by Robert Lacoste 2004-July
How to fix mistakes: solder braid, solder sucker.
How to deal with fine pitch SMT devices.
How to deal with big, heatsucking components.
Other techniques
How to get started with a multimeter
How to use an oscilloscope