Playing With PIC Pack

From OpenCircuits
Jump to navigation Jump to search

start

Author russ_hensel

I recording some experiences playing with pic pack.

Not linked into Open Circuits may do so later.

could not find beginning of blog, best I got was part 13, googling let me find welcome finally got the archive for 08 to open,


I am using BoostC 6.90 unlimmited non-commercial on a pretty much up to date XP system

First 4 parts

part1

part2

part3

part4

Just read them.

5. Your first pic program

part5

Jan 11 2009:

said: adventures\flash try instead: demos\flasher think this is were it is now

no mention of target, i left it at: 16f88

said building... but then nothing? I am using 6.90

tried compile and got error locating the compiler, so I pointed to mine, problem was I did not keep mine in the normal location, all users shuld check this setting

Then had error finding C:\Source\Electronics\MicroController\Pic\PicPack\demoCopy\flasher\flasher.c(7): Unable to open include file: pic_utils.h

this is because I had moved the project, need to keep the relative locations of... demos and pic_pack_lib unchanged


Now compiles successfully.

but warning

  1. ifndef GOT_CLOCK

#warning "Don't know about your clock. See pic_utils.h"

  1. endif


seems to be related to lack of definition of PLATFORM_CLOCK == 12000000 perhaps this is what should be in flasher.c instead of #pragma CLOCK_FREQ 8000000

or perhaps it is just a warning to be ignored.

note that /*

  • / denotes a comment that is ignored by the compiler.

6. Chip Programming

6. Chip Programming

I am going to try an 18f2550 so looking up the config for it


I am confused about config1, 2.... and the high and low so how do I read the .h file?

seems that for the 18F2550 we need

_CONFIG1L,  _CONFIG1H,   _CONFIG2L,   .... 

this seems at least to compile

7

[ part1x]

8

[ part1x]

9

[ part1x]

[ part1x]