Manhattan style

From OpenCircuits
Revision as of 10:13, 3 January 2009 by (talk) (acelboe)
Jump to navigation Jump to search

bassitr Manhattan style is one popular way to build ham radio electronics. It involves small "pads", typically circular dots roughly 3 mm diameter punched out of plain copper-clad board.

The pads are super-glued onto the "substrate", a large copper-clad board. Each component is mounted right-side-up by soldering its pins to pads.

The builders try to make each pad represent one node in the schematic -- every pin that connects to that node is soldered to one pad, when possible. When it's not possible, hook-up wire is used to connect pad-to-pad and pad-to-DIP-socket-pin.

Each ground pin of a component is soldered directly to the substrate.

K7QO has an excellent description of the technique:

(FIXME: put a photograph here)