Difference between revisions of "Linuxstamp"
| Line 24: | Line 24: | ||
*[http://atmel.com/dyn/products/product_card.asp?part_id=2983 Atmel]: AT91RM9200 info on Atmel's site | *[http://atmel.com/dyn/products/product_card.asp?part_id=2983 Atmel]: AT91RM9200 info on Atmel's site | ||
*[http://maxim.org.za/at91_26.html]: Up to date kernel patch | *[http://maxim.org.za/at91_26.html]: Up to date kernel patch | ||
| + | |||
| + | == Pricing == | ||
| + | The parts pricing qty 1 is $75 from digikey, and $55 for qty 100<br> | ||
| + | I'm sure this can be greatly reduced with higher quantity<br> | ||
| + | We will make a small run soon, and I will let you know when these available<br> | ||
Revision as of 18:14, 17 April 2007
Description
The Linuxstamp is designed to be a general purpose processor module. It is designed to work as a stand alone module (SD card, ethernet and USB/Serial converter are all on the module). This allows all initial development to be done without a motherboard, but for integration into a specific project a motherboard with specific features could be designed.
Features
-Atmel AT91RM9200 processor (Arm9 processor with MMU)
-32Mb SDRAM (Only limited by 1x 54-TSOP SDRAM chip)
-8Mb SPI Dataflash
-1x 10/100 Ethernet
-1x USB host port
-1x SD card slot
-Serial debug port access through FTDI USB/Serial converter
Licence
All files for this project are licensed under the GNU GPL V2
Project files
PCB Top view (pdf)
PCB Bottom view (pdf)
Schematic (pdf)
Status
Links
Pricing
The parts pricing qty 1 is $75 from digikey, and $55 for qty 100
I'm sure this can be greatly reduced with higher quantity
We will make a small run soon, and I will let you know when these available
