Difference between revisions of "JTAG"

From OpenCircuits
Jump to navigation Jump to search
(signals, not pins -the connectors have many more pins)
 
Line 1: Line 1:
The Joint Test Action Group (JTAG) standardized a 5 pin boundary-scan test port as IEEE Std. 1149.1, "Standard Test Access Port and Boundary-Scan Architecture".
+
The Joint Test Action Group (JTAG) standardized a 5 signal boundary-scan test port as IEEE Std. 1149.1, "Standard Test Access Port and Boundary-Scan Architecture".
  
 
While originally intended for boundary-scan testing of PCB assemblies, to replace bed-of-nails testing, the JTAG port included in many popular microprocessors is also often used for programming and debugging.
 
While originally intended for boundary-scan testing of PCB assemblies, to replace bed-of-nails testing, the JTAG port included in many popular microprocessors is also often used for programming and debugging.
Line 5: Line 5:
 
[http://hogyros.de/?q=node/167 "If you have information on how to connect a JTAG probe to a Nokia phone, please let me know."]
 
[http://hogyros.de/?q=node/167 "If you have information on how to connect a JTAG probe to a Nokia phone, please let me know."]
  
There are five pins:
+
There are five signals:
 
* TCK/clock
 
* TCK/clock
 
* TMS/mode select
 
* TMS/mode select

Latest revision as of 12:47, 1 November 2011

The Joint Test Action Group (JTAG) standardized a 5 signal boundary-scan test port as IEEE Std. 1149.1, "Standard Test Access Port and Boundary-Scan Architecture".

While originally intended for boundary-scan testing of PCB assemblies, to replace bed-of-nails testing, the JTAG port included in many popular microprocessors is also often used for programming and debugging.

"If you have information on how to connect a JTAG probe to a Nokia phone, please let me know."

There are five signals:

  • TCK/clock
  • TMS/mode select
  • TDI/data in
  • TDO/data out
  • TRST/reset (optional), when driven low, resets the internal state machine.

Except for TCK, all other JTAG lines should be pulled high via a resistor.


WARNING: unconfirmed pinout. Please add links to pinout standard.

20 Pin JTAG PinOut[edit]

    1 +3.3 V    2 +3.3 V
    3 nTRST     4 GND
    5 TDI       6 GND
    7 TMS       8 GND
    9 TCK      10 GND
   11  --      12 GND
   13 TDO      14 GND
   15 nRST     16 GND
   17  --      18 GND
   19  --      20 GND

external links[edit]