Difference between revisions of "GM862 SMD Connector"
Jump to navigation
Jump to search
Line 14: | Line 14: | ||
<b>Manufacturer Info:</b><br> | <b>Manufacturer Info:</b><br> | ||
− | Molex part # : 53748-0504 | + | [[Molex]] part # : 53748-0504 |
− | |||
− | |||
<b>Related Items:</b><br> | <b>Related Items:</b><br> |
Revision as of 16:10, 26 January 2006
Description:
This is the Molex SMD connector that interfaces to the GM862 Cellular Modules. If you're prototyping with the GM862, you pretty much have to have one of these. Watch out, it's 0.5mm pitch, 50-pin, SMD connector. You can solder it by hand, but you'll need some experience, solder wick, and a decent iron. You can also reflow it with a hot-plate and a stencil. If you're not comfortable soldering it, there are breakout boards and designs available from SFE.
Documents:
Molex Connector Footprint and Spec Sheet
Footprints:
Coming in a minute from SFE.
Manufacturer Info:
Molex part # : 53748-0504
Related Items:
GM862 Cellular Module
Original Creator: --Sparkfun 12:08, 26 January 2006 (PST)