Difference between revisions of "Fridge Defrost Timer with Solar Trigger Option"

From OpenCircuits
Jump to navigation Jump to search
(Created page with 'This fridge defrost timer is triggered from my solar panel system so the fridge defrost cycle will run only when I have excess power. It can be triggered from any 7 to 25vdc sig…')
 
m (link fix)
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
ALL MY PROJECTS ARE HERE: https://opencircuits.com/index.php?title=User:Definitionofis
 +
 
This fridge defrost timer is triggered from my solar panel system so the fridge defrost cycle will run only when I have excess power.
 
This fridge defrost timer is triggered from my solar panel system so the fridge defrost cycle will run only when I have excess power.
  
Line 19: Line 21:
  
 
http://img602.imageshack.us/img602/8869/fridgedefrostersolartim.png
 
http://img602.imageshack.us/img602/8869/fridgedefrostersolartim.png
 +
 +
[[File:Fridgedefrostersolartim.png]]
 +
 +
[[File:FridgeTimer board layout.png]]

Latest revision as of 13:12, 14 March 2021

ALL MY PROJECTS ARE HERE: https://opencircuits.com/index.php?title=User:Definitionofis

This fridge defrost timer is triggered from my solar panel system so the fridge defrost cycle will run only when I have excess power.

It can be triggered from any 7 to 25vdc signal. I used the battery vent fan signal from my Outback Battery charger.

It powers itself from the signal or from a micro-amp parasitic source. I did not want to use a power adapter which wastes power all day and is too big for the container.

www.dipmicro.com had a key part: cpc1030N, which is a surface mount Clare opto-isolated relay 0.85mA 1.4 input, controlling 120vac 120mA . and the prototyping board.

The two 10 farad super capacitors are $4 each at www.digikey.com. part #589-1002-ND. Project box: #SR123-IA-ND. Don't use Nichicon. They lose charge too quickly. The relay is: JQX-13F (be sure to select the 120vac coil JQX-13F A110-2Z1) $7.

circuit: http://img831.imageshack.us/img831/1354/fridgedefrostersolarsch.png board etch pattern: http://img511.imageshack.us/img511/368/fridgedefrostersolaretc.png

Later I discovered my mechanical timer only ran when the compressor was on. Plus, I added capacitors on the chip reset pins to stop electrical interference triggering false resets. So here is a revised schematic for that kind of defrost:

http://img602.imageshack.us/img602/8869/fridgedefrostersolartim.png

Fridgedefrostersolartim.png

FridgeTimer board layout.png