Difference between revisions of "Chemical Etchants"

From OpenCircuits
Jump to navigation Jump to search
m (Protected "Chemical Etchants": Excessive spamming ([Edit=Allow only autoconfirmed users] (expires 00:31, 10 November 2023 (UTC)) [Move=Allow only autoconfirmed users] (expires 00:31, 10 November 2023 (UTC))))
(109 intermediate revisions by 65 users not shown)
Line 1: Line 1:
[http://cyrusimap.web.cmu.edu/twiki/bin/view/Main/MartinGeword buy valium] [http://dcc.syr.edu/dforum/message.asp?MessageID=49064 real ringtones] [http://ist.greenville.edu/drupal/files/nesoz.html adipex online] [http://www.hollins.edu/ubb/Forum32/HTML/000284.html cheap phentermine] [http://www.hollins.edu/ubb/Forum32/HTML/000377.html free sony ericsson ringtones] [http://grid.unimelb.edu.au/twiki/pub/Main/JackLawson/wujygyp.htm cheap norco] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/JustinJonson/welop.htm cheap vigrx] [http://dcc.syr.edu/dforum/message.asp?MessageID=49023 cheap meridia] [http://www.hollins.edu/ubb/Forum32/HTML/000350.html order diethylpropion] [http://cyrusimap.web.cmu.edu/twiki/bin/view/Main/RaimusNuhem nokia ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/RobertSmith/luku.htm cheap xenical] [http://ist.greenville.edu/drupal/files/huki.html qwest ringtones] [http://dcc.syr.edu/dforum/message.asp?MessageID=49078 mono ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000298.html cheap clonazepam] [http://www.hollins.edu/ubb/Forum32/HTML/000282.html cheap soma] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SherylDiu/pyfi.htm sony ringtones] [http://ist.greenville.edu/drupal/files/woryh.html motorola ringtones] [http://grid.unimelb.edu.au/twiki/pub/Main/JamesMiller/fuzuhe.htm cialis online] [http://bugzilla.internet2.edu/attachment.cgi?id=749 free sony ericsson ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SherylDiu/noliwu.htm midi ringtones] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=37 cheap paxil] [http://devel.linux.duke.edu/bugzilla/attachment.cgi?id=261 tracfone ringtones] [http://devel.linux.duke.edu/bugzilla/attachment.cgi?id=254 xanax online] [http://bugzilla.internet2.edu/attachment.cgi?id=723 alltel ringtones] [http://grid.unimelb.edu.au/twiki/pub/Main/JamesMiller/tofi.htm xanax online] [http://www.hollins.edu/ubb/Forum32/HTML/000344.html buy pharmacy online] [http://ccfl.unl.edu/twiki/pub/Main/SummersFrank/jicir.htm cheap viagra] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/AshleighRodriquez/vojenyx.htm cheap alprazolam] [http://ist.greenville.edu/drupal/files/sotuky.html order soma] [http://ccfl.unl.edu/twiki/pub/Main/PaulinePauline/wudytel.htm free sonyericsson ringtones] [http://cyrusimap.web.cmu.edu/twiki/bin/view/Main/RobertDelise ultram online] [http://bugzilla.internet2.edu/attachment.cgi?id=724 alprazolam online] [http://ccfl.unl.edu/twiki/pub/Main/MarthaBell/webid.htm cheap hoodia] [http://dcc.syr.edu/dforum/message.asp?MessageID=49017 cheap diazepam] [http://ccfl.unl.edu/twiki/pub/Main/HermanHogg/rifykup.htm albuterol online] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=14 soma] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/PhillipRewers/hebur.htm free qwest ringtones] [http://bugzilla.internet2.edu/attachment.cgi?id=756 free verizon ringtones] [http://bugzilla.internet2.edu/attachment.cgi?id=729 clonazepam online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SherylDiu/kygo.htm free kyocera ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/BilyKroft/suvycez.htm cheap soma] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/JustinJonson/jucidul.htm hgh online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/RobertSmith/pyro.htm buy ambien] [http://grid.unimelb.edu.au/twiki/pub/Main/NoriJohn/bepi.htm nextel ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000315.html xenical online] [http://ccfl.unl.edu/twiki/pub/Main/AlexCarneyham/kyvydin.htm norco online] [http://dcc.syr.edu/dforum/message.asp?MessageID=48834 tramadol online] [http://dcc.syr.edu/dforum/message.asp?MessageID=49026 vicodin online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SelmaJeremy/tidu.htm free verizon ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SelmaJeremy/jivugyv.htm free alltel ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000371.html music ringtones] [http://bugzilla.internet2.edu/attachment.cgi?id=748 soma online] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=52 funny ringtones] [http://bugzilla.internet2.edu/attachment.cgi?id=731 free funny ringtones] [http://ccfl.unl.edu/twiki/pub/Main/SummersFrank/cogope.htm cialis] [http://dcc.syr.edu/dforum/message.asp?MessageID=49058 free tracfone ringtones] [http://ccfl.unl.edu/twiki/pub/Main/SummersFrank/solizup.htm tramadol online] [http://cyrusimap.web.cmu.edu/twiki/bin/view/Main/ArturJonson xanax online] [http://ccfl.unl.edu/twiki/pub/Main/MarthaBell/duxeru.htm but vigrx] [http://dcc.syr.edu/dforum/message.asp?MessageID=49066 samsung ringtones] [http://ccfl.unl.edu/twiki/pub/Main/SummersFrank/wytyvib.htm buy fioricet] [http://bugzilla.internet2.edu/attachment.cgi?id=741 buy paxil] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=40 cheap ambien] [http://ccfl.unl.edu/twiki/pub/Main/PaulinePauline/tijohyw.htm free sprint ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/PhillipRewers/jetok.htm free mp3 ringtones] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=20 fioricet online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/BettySmith/pefuwe.htm lipitor online] [http://ist.greenville.edu/drupal/files/wohux.html ultracet online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/BettySmith/ligi.htm cheap tenuate] [http://grid.unimelb.edu.au/twiki/pub/Main/JamesMiller/cucof.htm buy soma] [http://cyrusimap.web.cmu.edu/twiki/bin/view/Main/LukeLookin phentermine online] [http://ccfl.unl.edu/twiki/pub/Main/AlexCarneyham/pinucep.htm vicodin online] [http://ccfl.unl.edu/twiki/pub/Main/HermanHogg/hujox.htm cheap ortho] [http://ist.greenville.edu/drupal/files/wusywyx.html vicodin online] [http://ist.greenville.edu/drupal/files/lunic.html cheap levitra] [http://dcc.syr.edu/dforum/message.asp?MessageID=49024 adipex] [http://ccfl.unl.edu/twiki/pub/Main/PaulinePauline/vuxinuz.htm motorola ringtones] [http://bugzilla.internet2.edu/attachment.cgi?id=722 cheap adipex] [http://www.hollins.edu/ubb/Forum32/HTML/000365.html free nextel ringtones] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=21 order ultram] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/PhillipRewers/jusify.htm nokia ringtones] [http://devel.linux.duke.edu/bugzilla/attachment.cgi?id=262 funny ringtones] [http://dcc.syr.edu/dforum/message.asp?MessageID=48922 buy carisoprodol] [http://bugzilla.internet2.edu/attachment.cgi?id=742 buy phentermine] [http://www.hollins.edu/ubb/Forum32/HTML/000283.html cheap valium] [http://ccfl.unl.edu/twiki/pub/Main/PaulinePauline/jowili.htm qwest ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000342.html cheap tenuate] [http://bugzilla.internet2.edu/attachment.cgi?id=750 sonyericsson ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/PhillipRewers/licox.htm free motorola ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000319.html cheap cyclobenzaprine] [http://www.hollins.edu/ubb/Forum32/HTML/000295.html cheap norco] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/JustinJonson/tokuny.htm lortab online] [http://www.hollins.edu/ubb/Forum32/HTML/000354.html flexeril online] [http://bugzilla.internet2.edu/attachment.cgi?id=752 tracfone ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000285.html cheap carisoprodol] [http://www.hollins.edu/ubb/Forum32/HTML/000299.html paxil] [http://dcc.syr.edu/dforum/message.asp?MessageID=49063 qwest ringtones] [http://devel.linux.duke.edu/bugzilla/attachment.cgi?id=249 buy tramadol] [http://ccfl.unl.edu/twiki/pub/Main/AlexCarneyham/sywexyc.htm levitra online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/RobertSmith/zexuc.htm didrex online] [http://www.hollins.edu/ubb/Forum32/HTML/000380.html punk ringtones] [http://ccfl.unl.edu/twiki/pub/Main/AlexCarneyham/kite.htm ultracet] [http://www.hollins.edu/ubb/Forum32/HTML/000311.html buy hydrocodone] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=42 xenical online] [http://ist.greenville.edu/drupal/files/luho.html free nokia ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SelmaJeremy/rufog.htm sprint ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/JustinJonson/jujope.htm diethylpropion online] [http://www.hollins.edu/ubb/Forum32/HTML/000294.html adipex online] [http://ccfl.unl.edu/twiki/pub/Main/PaulinePauline/roteryh.htm polyphonic ringtones] [http://cyrusimap.web.cmu.edu/twiki/bin/view/Main/AndreaHolivel cheap cialis] [http://dcc.syr.edu/dforum/message.asp?MessageID=49016 ultram online] [http://www.hollins.edu/ubb/Forum32/HTML/000336.html clomid online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SelmaJeremy/hijosij.htm sagem ringtones] [http://ist.greenville.edu/drupal/files/bigibe.html nextel ringtones] [http://dcc.syr.edu/dforum/message.asp?MessageID=49027 alprazolam online] [http://www.hollins.edu/ubb/Forum32/HTML/000288.html order ultram] [http://ccfl.unl.edu/twiki/pub/Main/AlexCarneyham/hicif.htm cheap alprazolam] [http://ccfl.unl.edu/twiki/pub/Main/PaulinePauline/sujy.htm free samsung ringtones] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=25 cheap viagra] [http://bugzilla.internet2.edu/attachment.cgi?id=735 free motorola ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/AshleighRodriquez/jybuhi.htm viagra online] [http://dcc.syr.edu/dforum/message.asp?MessageID=48916 cheap phentermine] [http://devel.linux.duke.edu/bugzilla/attachment.cgi?id=256 ultram online] [http://bugzilla.internet2.edu/attachment.cgi?id=760 diazepam online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/JustinJonson/xyhyj.htm rivotril online] [http://ccfl.unl.edu/twiki/pub/Main/SummersFrank/vuru.htm ativan online] [http://ccfl.unl.edu/twiki/pub/Main/AlexCarneyham/hykidi.htm clonazepam online] [http://www.hollins.edu/ubb/Forum32/HTML/000281.html tramadol online] [http://devel.linux.duke.edu/bugzilla/attachment.cgi?id=253 carisoprodol online] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=26 meridia online] [http://ist.greenville.edu/drupal/files/dydyse.html cheap valium] [http://ccfl.unl.edu/twiki/pub/Main/HermanHogg/rukexo.htm zoloft online] [http://ist.greenville.edu/drupal/files/kuxer.html cheap cyclobenzaprine] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SelmaJeremy/cybo.htm free sonyericsson ringtones] [http://ccfl.unl.edu/twiki/pub/Main/MarthaBell/nezyz.htm flexeril online] [http://ccfl.unl.edu/twiki/pub/Main/SummersFrank/lyfogo.htm xanax] [http://ccfl.unl.edu/twiki/pub/Main/MarthaBell/wofo.htm nokia ringtones] [http://grid.unimelb.edu.au/twiki/pub/Main/JamesMiller/sonuhop.htm cheap valium] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/RobertSmith/pevesuz.htm wellbutrin online] [http://ccfl.unl.edu/twiki/pub/Main/HermanHogg/rypel.htm online sildenafil] [http://www.hollins.edu/ubb/Forum32/HTML/000339.html zoloft online] [http://devel.linux.duke.edu/bugzilla/attachment.cgi?id=251 valium online] [http://www.hollins.edu/ubb/Forum32/HTML/000384.html free midi ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000290.html cheap cialis] [http://bugzilla.internet2.edu/attachment.cgi?id=744 free qwest ringtones] [http://devel.linux.duke.edu/bugzilla/attachment.cgi?id=266 real ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/PhillipRewers/kino.htm real ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SelmaJeremy/belizyl.htm polyphonic ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/PhillipRewers/dijuxoj.htm tracfone ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000322.html ultracet online] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=28 norco online] [http://dcc.syr.edu/dforum/message.asp?MessageID=49072 polyphonic ringtones] [http://bugzilla.internet2.edu/attachment.cgi?id=732 buy levitra] [http://ccfl.unl.edu/twiki/pub/Main/AlexCarneyham/woguked.htm ambien online] [http://www.hollins.edu/ubb/Forum32/HTML/000334.html cheap sildenafil] [http://www.hollins.edu/ubb/Forum32/HTML/000333.html cheap prozac] [http://ist.greenville.edu/drupal/files/rucod.html xanax online] [http://www.hollins.edu/ubb/Forum32/HTML/000343.html ortho online] [http://ist.greenville.edu/drupal/files/wypy.html funny ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000296.html cheap vicodin] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/BilyKroft/koky.htm phentermine online] [http://bugzilla.internet2.edu/attachment.cgi?id=740 cheap norco] [http://ccfl.unl.edu/twiki/pub/Main/HermanHogg/figog.htm lortab online] [http://ccfl.unl.edu/twiki/pub/Main/AlexCarneyham/kozu.htm cheap hydrocodone] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=24 cheap ativan] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/AshleighRodriquez/godufit.htm buy paxil] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SelmaJeremy/sevuv.htm free mono ringtones] [http://bugzilla.internet2.edu/attachment.cgi?id=755 valium] [http://grid.unimelb.edu.au/twiki/pub/Main/JamesMiller/sicofyr.htm cheap tramadol] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/BettySmith/kuvodoj.htm zoloft online] [http://dcc.syr.edu/dforum/message.asp?MessageID=49034 hydrocodone] [http://dcc.syr.edu/dforum/message.asp?MessageID=49022 cheap viagra] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/BettySmith/niwupu.htm cheap albuterol] [http://ccfl.unl.edu/twiki/pub/Main/MarthaBell/gedenu.htm rivotril online] [http://ccfl.unl.edu/twiki/pub/Main/PaulinePauline/dyzoko.htm verizon ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000314.html lorazepam] [http://grid.unimelb.edu.au/twiki/pub/Main/JackLawson/rejyvob.htm viagra online] [http://www.hollins.edu/ubb/Forum32/HTML/000325.html cheap didrex] [http://ccfl.unl.edu/twiki/pub/Main/SummersFrank/kuzypuh.htm phentermine online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/SelmaJeremy/nofelyr.htm cingular ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000389.html ericsson ringtones] [http://dcc.syr.edu/dforum/message.asp?MessageID=49077 sony ericsson ringtones] [http://devel.linux.duke.edu/bugzilla/attachment.cgi?id=267 free motorola ringtones] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/JustinJonson/kuluc.htm zanaflex online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/JustinJonson/gekiw.htm flexeril online] [http://www.hollins.edu/ubb/Forum32/HTML/000369.html free samsung ringtones] [http://devel.linux.duke.edu/bugzilla/attachment.cgi?id=259 nokia ringtones] [http://www.coe.unt.edu/chec/forum/forum_posts.asp?TID=22 diazepam online] [http://www.hollins.edu/ubb/Forum32/HTML/000376.html free sonyericsson ringtones] [http://ist.greenville.edu/drupal/files/devowy.html lorazepam online] [http://ist.greenville.edu/drupal/files/role.html free real ringtones] [http://www.hollins.edu/ubb/Forum32/HTML/000351.html but rivotril] [http://www.hollins.edu/ubb/Forum32/HTML/000312.html ambien online] [http://www.hollins.edu/ubb/Forum32/HTML/000337.html cheap albuterol] [http://dcc.syr.edu/dforum/message.asp?MessageID=49018 cialis online] [http://dcc.syr.edu/dforum/message.asp?MessageID=49035 buy ambien] [http://bugzilla.internet2.edu/attachment.cgi?id=746 sagem ringtones] [http://dcc.syr.edu/dforum/message.asp?MessageID=49025 cheap norco] [http://ist.greenville.edu/drupal/files/puweso.html meridia online] [http://wwwx.cs.unc.edu/~kmp/twiki40/pub/Main/RobertSmith/cibedis.htm cheap nexium] {{stub}}
+
{{stub}}
  
After masking off the parts of the copper-clad board you want to keep, you need to remove the parts you don't want to keep. This is usually done by chemically etching away the copper. There are a lot of different chemical techniques for doing this, each with its own advantages and drawbacks.
+
Chemical etching is one step of some popular [[techniques | PCB fabrication techniques]].
 +
 
 +
In this technique,
 +
* one starts with a copper-clad board.
 +
* one puts a mask over all the copper he want to keep. There are a variety of ways to do this -- see [[Toner Transfer]] and [[Photoetching]].
 +
* one removes the parts he don't want to keep, by chemically etching away the copper.
 +
* cleanup: wash off the board in the sink; carefully store or dispose of the acid.
 +
 
 +
There are a lot of different chemical techniques for doing this, each with its own advantages and drawbacks.
  
 
None of these chemicals is incredibly dangerous, but they can all be toxic or caustic, and should be treated with care. Eye protection and gloves are a very good idea. Before you start, make sure you know how dangerous each chemical is, and figure out what you will need to do if you spill it or get it on yourself. Washing with plenty of water is usually a good start. For some chemicals you may want to keep a neutralizing agent handy. An MSDS (Materials Safety Data Sheet) for the chemical will give you some basic information.
 
None of these chemicals is incredibly dangerous, but they can all be toxic or caustic, and should be treated with care. Eye protection and gloves are a very good idea. Before you start, make sure you know how dangerous each chemical is, and figure out what you will need to do if you spill it or get it on yourself. Washing with plenty of water is usually a good start. For some chemicals you may want to keep a neutralizing agent handy. An MSDS (Materials Safety Data Sheet) for the chemical will give you some basic information.
 +
 +
== vinegar and salt ==
 +
 +
* [http://www.kobakant.at/DIY/?p=2575 How to get what you want: Salt and Vinegar Etching]
 +
* [http://www.flickr.com/photos/jeanbaptisteparis/4831465916/ smt pcb with Salt and Vinegar]
 +
* [http://www.instructables.com/id/The-Saltwater-etch-process/ The Saltwater etch process]
 +
* [http://www.electro-tech-online.com/general-electronics-chat/33876-electro-etching-no-acid.html electro etching a PCB with vinegar, salt, and a 12 V power supply] (the copper etched off the PCB is plated on the anode?) -- however, other people claim that "You should not be using any acids (or basic 'acids') with your [electro] etcher at all. No FeCl no vinegar, etc ".[http://www.bladeforums.com/forums/showthread.php?t=671936]
  
 
== Ferric Chloride ==
 
== Ferric Chloride ==
 
This is the most common hobbyist etchant. Ferric chloride, FeCl<sub>3</sub>, is a brownish substance. It's usually sold in a bottle (dissolved in water, perhaps with a little acid or peroxide) or as a powder (which you have to dissolve in water).
 
This is the most common hobbyist etchant. Ferric chloride, FeCl<sub>3</sub>, is a brownish substance. It's usually sold in a bottle (dissolved in water, perhaps with a little acid or peroxide) or as a powder (which you have to dissolve in water).
  
When in solution, ferric chloride is a ferric ion (Fe<sup>3 </sup>) and a chloride ion (Cl<sup>-</sup>). The ferric ion reacts with the metallic copper on the circuit board in a redox reaction, producing a ferrous ion (Fe<sup>2 </sup>) and cuprous or cupric (Cu<sup>1 </sup> or Cu<sup>2 </sup>) copper. The chlorine is just along for the ride. The copper ion, unlike the metallic copper, is soluble, so it leaves the circuit board and goes into solution. The reaction products form a black sludge which settles to the bottom of the etching tank. After etching enough copper, all your Fe<sup>3 </sup> is used up and your solution is full of Cu<sup>1 </sup>, and you need to get more etchant.
+
When in solution, ferric chloride is a ferric ion (Fe<sup>3+</sup>) and a chloride ion (Cl<sup>-</sup>). The ferric ion reacts with the metallic copper on the circuit board in a redox reaction, producing a ferrous ion (Fe<sup>2+</sup>) and cuprous or cupric (Cu<sup>1+</sup> or Cu<sup>2+</sup>) copper. The chlorine is just along for the ride. The copper ion, unlike the metallic copper, is soluble, so it leaves the circuit board and goes into solution. The reaction products form a black sludge which settles to the bottom of the etching tank. After etching enough copper, all your Fe<sup>3+</sup> is used up and your solution is full of Cu<sup>1+</sup>, and you need to get more etchant.
  
 
== Ammonium Persulfate ==
 
== Ammonium Persulfate ==
 +
Expensive & hard to control and optimize the process parameters (such as specific gravity & pH value).
 +
 +
== HydroChloric Acid / Hydrogen Peroxide ==
 +
 +
Mixing about 1 part HCl (Which can be found at most hardware stores, also known as Muriatic Acid. Ask for concrete cleaner.) into 2 parts Hydrogen peroxide (normally used for cleaning cuts) you can make a fairly powerful etchant. Use gloves and don't breathe the fumes though. This will etch a 3"x5" board in less than 10 minutes. No need to heat it up. I usually like to drill a small hole through the board on a corner and thread a wire or nylon string through to help agitate / remove the board.
 +
 +
When the board is done etching, the etchant will probably look like green kool-aid, from the copper content in it. This stuff is highly corrosive and will burn skin, which is why you should wear gloves. But it is easy to handle, and fairly easy to dispose of. the etchant is easily deactivated with baking soda. Pour enough baking soda into it slowly (to keep it from boiling and overflowing... remember what happens with baking soda/vinegar? ya...) until it is a solid mass, then leave it in the sun to dry. You should contact your local authorities to find out what you should do with it next. Whatever you do, DO NOT dump the stuff down the drain, it will eat through your pipes just like any of the other etchants.
 +
 +
Alternatively, instead of disposing of the etchant, you can re-use it again and again. In fact, after etching a few boards with this solution, you will have successfully made [[Chemical Etchants#Acid Cupric Chloride|Acid Cupric Chloride]] (see below).
 +
You can also find a detailed tutorial on etching at [http://robotplatform.com/howto/pcb%20etching/pcb_etching_1.html Muriatic Acid etching tutorial]
  
 
== Sodium Persulfate ==
 
== Sodium Persulfate ==
Line 25: Line 50:
 
Directions:
 
Directions:
  
# Mix your HCl and H<sub>2</sub>O<sub>2</sub> 1:1 in a non-metalic container, making sure to add the acid slowly to the H<sub>2</sub>O<sub>2</sub>. DO NOT ADD THE H<sub>2</sub>O<sub>2</sub> TO THE ACID!!!  
+
# Mix your HCl and H<sub>2</sub>O<sub>2</sub> 1:1 in a non-metalic container, making sure to add the acid slowly to the H<sub>2</sub>O<sub>2</sub>. DO NOT ADD THE H<sub>2</sub>O<sub>2</sub> TO THE ACID!!!
 
# After you've masked your board, dip it in the solution and constantly agitate. You should notice a dark green cloud start to come from the board almost immedately which quickly dissapears or turns lighter as it gets further from the surface of the board.
 
# After you've masked your board, dip it in the solution and constantly agitate. You should notice a dark green cloud start to come from the board almost immedately which quickly dissapears or turns lighter as it gets further from the surface of the board.
 
# Etching should take about 10min depending on the temperature and how well you agitated the etchant. When all of the copper is gone, dip in water to wash off any stray etchant and stop the reaction.
 
# Etching should take about 10min depending on the temperature and how well you agitated the etchant. When all of the copper is gone, dip in water to wash off any stray etchant and stop the reaction.
Line 33: Line 58:
  
 
== Disposal procedures ==
 
== Disposal procedures ==
Flushing used etchant down the drain is a bad idea (and usually illegal) because copper ion is toxic. The usual recommended way to dispose of hobbyist amounts of etchant is to convert it to a solid somehow and dispose of the solid in the trash.
+
Flushing used etchant down the drain is a bad idea (and usually illegal) because copper ion is toxic. The usual recommended way to dispose of hobbyist amounts of etchant is to convert it to a solid somehow and dispose of the solid in accordance with local laws.
* [http://www.kepro.com/fmc4.htm Kepro Circuit Systems] Removal of Copper and Persulfate from Spent Sodium Persulfate Etchant by Precipitation
 
  
 
== External Links ==  
 
== External Links ==  
 +
 +
* [http://www.instructables.com/id/Sponge-Ferric-Chloride-Method-Etch-Circuit-Bo/ "Sponge + Ferric Chloride Method -- Etch PCBs in One Minute!"]
 
* [http://www.k9spud.com/wiki/PCB:Etchants Ferric Chloride vs. Ammonium Persulfate] and other etching chemicals.
 
* [http://www.k9spud.com/wiki/PCB:Etchants Ferric Chloride vs. Ammonium Persulfate] and other etching chemicals.
 
* [http://members.optusnet.com.au/~eseychell/PCB/etching_CuCl/index.html Etching with Air Regenerated Acid Cupric Chloride] — an excellent in-depth page on acid cupric chloride etching by Adam Seychell.
 
* [http://members.optusnet.com.au/~eseychell/PCB/etching_CuCl/index.html Etching with Air Regenerated Acid Cupric Chloride] — an excellent in-depth page on acid cupric chloride etching by Adam Seychell.
* [http://esmonde-white.com/etching_pcb.html Etching a Copper PCB with HCl and H2O2]
+
* [http://www.esmonde-white.com/home/diversions/etching-a-copper-pcb Etching a Copper PCB with HCl and H2O2]
 +
* [http://www.mgchemicals.com/ MG Chemicals] A possible source?
 +
* [http://reprap.org/wiki/MakePCBInstructions RepRap wiki: Make PCB instructions]
 +
 
 +
== Internal Links ==
 +
 
 +
 
 +
*[[Toner Transfer]]
 +
*[[Techniques]]
 +
*[[Eagle Links]]
 +
 
 +
 
 +
[[Category:Techniques]]

Revision as of 17:31, 9 November 2022

Chemical etching is one step of some popular PCB fabrication techniques.

In this technique,

  • one starts with a copper-clad board.
  • one puts a mask over all the copper he want to keep. There are a variety of ways to do this -- see Toner Transfer and Photoetching.
  • one removes the parts he don't want to keep, by chemically etching away the copper.
  • cleanup: wash off the board in the sink; carefully store or dispose of the acid.

There are a lot of different chemical techniques for doing this, each with its own advantages and drawbacks.

None of these chemicals is incredibly dangerous, but they can all be toxic or caustic, and should be treated with care. Eye protection and gloves are a very good idea. Before you start, make sure you know how dangerous each chemical is, and figure out what you will need to do if you spill it or get it on yourself. Washing with plenty of water is usually a good start. For some chemicals you may want to keep a neutralizing agent handy. An MSDS (Materials Safety Data Sheet) for the chemical will give you some basic information.

vinegar and salt

Ferric Chloride

This is the most common hobbyist etchant. Ferric chloride, FeCl3, is a brownish substance. It's usually sold in a bottle (dissolved in water, perhaps with a little acid or peroxide) or as a powder (which you have to dissolve in water).

When in solution, ferric chloride is a ferric ion (Fe3+) and a chloride ion (Cl-). The ferric ion reacts with the metallic copper on the circuit board in a redox reaction, producing a ferrous ion (Fe2+) and cuprous or cupric (Cu1+ or Cu2+) copper. The chlorine is just along for the ride. The copper ion, unlike the metallic copper, is soluble, so it leaves the circuit board and goes into solution. The reaction products form a black sludge which settles to the bottom of the etching tank. After etching enough copper, all your Fe3+ is used up and your solution is full of Cu1+, and you need to get more etchant.

Ammonium Persulfate

Expensive & hard to control and optimize the process parameters (such as specific gravity & pH value).

HydroChloric Acid / Hydrogen Peroxide

Mixing about 1 part HCl (Which can be found at most hardware stores, also known as Muriatic Acid. Ask for concrete cleaner.) into 2 parts Hydrogen peroxide (normally used for cleaning cuts) you can make a fairly powerful etchant. Use gloves and don't breathe the fumes though. This will etch a 3"x5" board in less than 10 minutes. No need to heat it up. I usually like to drill a small hole through the board on a corner and thread a wire or nylon string through to help agitate / remove the board.

When the board is done etching, the etchant will probably look like green kool-aid, from the copper content in it. This stuff is highly corrosive and will burn skin, which is why you should wear gloves. But it is easy to handle, and fairly easy to dispose of. the etchant is easily deactivated with baking soda. Pour enough baking soda into it slowly (to keep it from boiling and overflowing... remember what happens with baking soda/vinegar? ya...) until it is a solid mass, then leave it in the sun to dry. You should contact your local authorities to find out what you should do with it next. Whatever you do, DO NOT dump the stuff down the drain, it will eat through your pipes just like any of the other etchants.

Alternatively, instead of disposing of the etchant, you can re-use it again and again. In fact, after etching a few boards with this solution, you will have successfully made Acid Cupric Chloride (see below). You can also find a detailed tutorial on etching at Muriatic Acid etching tutorial

Sodium Persulfate

More environmentally friendly than ferric chloride. Can monitor the etching as initially clear new etchant solution turns blue from the copper ions.

Acid Cupric Chloride

Dead simple etchant made from ordinary, store-bought chemicals (hydrochloric acid and hydrogen peroxide). Has the advantage that it can be regenerated by bubbling oxygen/air through it, or by adding more H2O2. In addition, it doesn't get used up: the etchant bath simply grows with use (kind of like sourdough starter…) The used etchant also makes a great algecide/pH reducer for your pool (and a whole lot cheaper than that stuff they sell at the pool store).

What you need:

  • 38% Hydrochloric Acid, HCl (available at finer hardware stores or pool supply stores as Muriatic Acid)
  • 3% Hydrogen Peroxide, H2O2 (available from any drug store)
  • Plastic or Glass Pans, Jars, and tongs (no metal)

Directions:

  1. Mix your HCl and H2O2 1:1 in a non-metalic container, making sure to add the acid slowly to the H2O2. DO NOT ADD THE H2O2 TO THE ACID!!!
  2. After you've masked your board, dip it in the solution and constantly agitate. You should notice a dark green cloud start to come from the board almost immedately which quickly dissapears or turns lighter as it gets further from the surface of the board.
  3. Etching should take about 10min depending on the temperature and how well you agitated the etchant. When all of the copper is gone, dip in water to wash off any stray etchant and stop the reaction.
  4. When done etching, save used etchant in a non-metalic container and mark clearly its contents.
  5. If your etchant has become a dark, murky green color, add a little bit of H2O2 or bubble air/O2 through the solution to regenerate it back to a light, transparent green color.

See links at bottom for more information on the chemistry and some pictures of the process.

Disposal procedures

Flushing used etchant down the drain is a bad idea (and usually illegal) because copper ion is toxic. The usual recommended way to dispose of hobbyist amounts of etchant is to convert it to a solid somehow and dispose of the solid in accordance with local laws.

External Links

Internal Links