Difference between revisions of "Chalk Roach"

From OpenCircuits
Jump to navigation Jump to search
(add links that (hopefully) have all the information that was on now-dead links.)
(linkfix, etc.)
 
(One intermediate revision by the same user not shown)
Line 28: Line 28:
 
== MiniSix ==
 
== MiniSix ==
  
The [http://web.media.mit.edu/~awhiton/mini6.htm MiniSix] is the smaller (26mm x 26mm) surface mount version of the Number Six microcontroller.
+
The [https://web.archive.org/web/20121107173841/http://web.media.mit.edu/~awhiton/mini6.htm MiniSix]
 +
by [http://web.media.mit.edu/~awhiton/ Adam Whiton]
 +
is the smaller (26mm x 26mm) surface mount version of the Number Six microcontroller.
 
Atmel AVR ATmega32
 
Atmel AVR ATmega32
 
The MiniSix board is designed for a vertical stacking strategy using a 40 pin Hirose connector.
 
The MiniSix board is designed for a vertical stacking strategy using a 40 pin Hirose connector.
  
The MiniSix platform is availible as open source hardware and is registered with the Open Source Hardware and Design Alliance [http://www.ohanda.org/ OHANDA].
+
The MiniSix platform is availible as open source hardware and is registered with the Open Source Hardware and Design Alliance [http://www.ohanda.org/products/minisix-microcontroller-0 MiniSix at OHANDA].
 
 
  
  
 
[[Category:Projects]]
 
[[Category:Projects]]

Latest revision as of 20:51, 16 February 2015

Number Six[edit]

"The New Number Six - Embedded Microcontroller for Starving Artists"

http://web.media.mit.edu/~nvawter/usb6/

http://web.media.mit.edu/~nvawter/number6/audioBoard


Chalk Roach[edit]

This project was developed by the Computing Culture Group at the MIT Media Lab.

It's now called #6!

It's a 2"x2" (5cm x 5cm) one-side printed circuit board that supports the very robust Atmega32 microcontroller.

Because it's one-sided, you can make them at home with Press and Peel Blue a clothes iron, and Ferric Chloride from Radio Shack.

It can be configured minimally with just a tiny handful of components yet connect to so many different things.

Main development page

http://web.media.mit.edu/~nvawter/chalkroach/ via Noah Vawter

MiniSix[edit]

The MiniSix by Adam Whiton is the smaller (26mm x 26mm) surface mount version of the Number Six microcontroller. Atmel AVR ATmega32 The MiniSix board is designed for a vertical stacking strategy using a 40 pin Hirose connector.

The MiniSix platform is availible as open source hardware and is registered with the Open Source Hardware and Design Alliance MiniSix at OHANDA.