Pi Setup Nov 2016

From OpenCircuits
Revision as of 14:16, 21 November 2016 by Russ hensel (talk | contribs) ()
Jump to navigation Jump to search

Yet another setup for the Pi


Base OS

https://www.raspberrypi.org/downloads/

  • Raspbian
  • RASPBIAN JESSIE WITH PIXEL
  • Win32DiskImager utility
  • put on 16 gig micro card
  • boot
  • Before installing new application or service in Raspbian, make sure to
  • always type this into terminal: ( if this file is on your PI use cut and paste )

This takes awhile ( perhaps an hour? )

sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade

  • as shipped id is pi password is raspberry. default user is pi , and the password is raspberry
  • Change your password. When logged in as the pi user, you can change your password with the passwd command. Enter passwd on the command line and press Enter . You'll be prompted to enter your current password to authenticate, and then asked for a new password.
passwd

Set Up Remote Desktop

  1. use this command to setup the pi
sudo apt-get install xrdp


on the pi issue the command

ifconfig

and read the tcpip address of the pi( inet addr )

Spyder

>>> sudo apt-get install spyder