Linuxstamp
Description
The Linuxstamp is designed to be a general purpose processor module. It is designed to work as a stand alone module (SD card, ethernet and USB/Serial converter are all on the module). This allows all initial development to be done without a motherboard, but for integration into a specific project a motherboard with specific features could be designed.
Features
- Atmel AT91RM9200 processor (Arm9 processor with MMU)
- 32Mb SDRAM (Only limited by 1x 54-TSOP SDRAM chip)
- 8Mb SPI Dataflash
-1x 10/100 Ethernet
-1x USB host port
-1x SD card slot
-Serial debug port access through FTDI USB/Serial converter
-2-Layer PCB design
Licence
All files for this project are licensed under the GNU GPL V2
Project files
Status
Links
- Atmel: AT91RM9200 info on Atmel's site
- [1]: Up to date kernel patch
- Cadsoft.de: Free (as in beer) tools for schematic and PCB design
- openhardware.wordpress.com: Here is my openhardware blog
Pricing
The parts cost for qty 1 is $75 from digikey, and $55 for qty 100
I'm sure this can be greatly reduced with higher quantity
We will make a small run soon, and I will let you know when these are available
discussion
Can I plug a USB peripheral into the Linuxstamp, such as a USB Wifi adapter? --DavidCary 22:02, 17 April 2007 (PDT) Yes, any USB device that is supported by the kernel should work with the Linuxstamp. --Linuxvolts 23:15, 18 April 2007 (PDT)
