Programmable Chip EEG

From OpenCircuits
Revision as of 15:31, 12 January 2007 by Josh eeg (talk | contribs)
Jump to navigation Jump to search

The Programmable Chip EEG

Welcome to the PCEEG Wiki, where everyone can add to this EEG brain-computer interface!

PCEEG, What it is and why it can be the best

This is usefull to calibrate multiple analog boards for different EEG tests.

  • This can be used for a brain-computer interface with biofeedback using a flex sensor or servo to detect fingure movements.
  • The Digitally Programmable Potentiometers AD5204 4-Channel Digitally Controlled Potentiometer is used to make calibration of this device easier. (Historically, a weak point of homebrew designs has been their sensitivity to component value; tolerance and drift have made them require constant tweaking for good results.)
  • To reduce noise in the readout of the analog part of this circuit, a common-mode feedback is passed back into the body by the driver right leg circuit. Band reject filter may also be used (to reject, for example, 60Hz noise from nearby A/C power wiring).
  • The analog signal prossesing board will digitise the signal and pass the data to the control board. The control board is based on the AVR Butterfly which will, further process the signals, and provide an interface to a computer & lcd display.

Status

We currently have a (preliminary?) circuit design and a (prelimary) PCB layout. We are using LT switcher CAD to draw the scematic.

Hardware Overview

Here is a diagram of how the analog signal processing boards and the microprocessor board will come together. Pceeg.jpg Here is how the analog signal prossesing board will come together. Newpceeghddesign.png

ESD Protection in 1168 and Max3235E

Chips have been chosen that fallow the human body model of esd protection this can be seen in the 1168 and Max3235E datasheet.

Description of How it Works

The daughter signal prossesing board is responcible for filtering and digitising the signals from the body, then the signals are passed to the control board that is the motherboard. The motherboard then can pass the signal to a larger computer.

The differential analog signal is amplified by the instramentation amplifier. Then the signal is amplified and conditioned by high pass and low pass filters.

The common mode signal is inverted summed and sent back to the body to decrese common mode signal thsi is done by the driver right leg circuit.

Band reject filters may be added soon in the future.

Then the analog signals are simultaniously digitized and the digital values can be clocked to the controler motherboard.

The controler board that is the mother board of the system and the signal prossesing daughter boards plug into is the AVR Butterfly

How You Can Help

  1. . get the tools

Software Tools

  • We are using LT switcher CAD to draw the scematic. This also is a SPICE Simulator used to analize the amplifier design.
  • Eagle CAD could be used in the future after all the parts are surface mount & the analog sections are alalised. To autorout future designs.
  • Express PCB is being used to create the first PCB but surface mount must be used to save hole count and space.
  • Maxima a computer algebra system s used for graphing and matth displays.
  • I2C interface diagram for programmable resistors and a/d converters 12 or more bits with low cost.
  • SPI interface diagram for programmable resistors and a/d converters 12 or more bits with low cost.
  • linear switcher cad schematic drawing from PCEEG technology applied to the Open EEG design with improvements.
  • migrate from switcher cad to pcb express.
  • migrate from pcb express to eagle cad after testing to further development.

Parts used in the PCEEG:

To reduce noise in the readout of the analog part of this circuit, a common-mode feedback is passed back into the body by the driver right leg circuit. Band reject filter may also be used (to reject, for example, 60Hz noise from nearby A/C power wiring).

The analog signal prossesing board will digitise the signal and pass the data to the control board. The control board is based on the AVR Butterfly which will, further process the signals, and provide an interface to a computer & lcd display.

News

The design is switching to EAGLE CAD, because the auto-router is excellent for open-source productivity. It will allow the design to evolve faster and with less work with a wider selection of PCB Manufacturers.

Here is a picture of the PCEEG being done in EagleCAD. Eagle sample.GIF The eagle cad file is here Media:PCEEGHD.zip

The ideas and monkey to robot arm interface by Miguel Nicolelisis very inspiring. He used implanted electrodes to monitor and allow monkeys to control a robot arm as if it was their own. Could the PCEEG do the same with its electrodes on the scalp. Only the future will show.

Open Source Circuit Design

Open source (public) results!

PHP will be used to create a database of users and what they sample and choose to share with the open source community.

The database will give statistical analysis on users recordings.

Also the extension of SETI called BIONIC could be used as a distributed library creation of artifacts and data mining.

Please contribute and make the PCEEG a great tool for researching brain computer interfaces.

A/D Converters

The programmable chip EEG needs an A/D converter to convert the analog signal (at the output of the instrumentation amplifier) into digital bits. We expect this project to require at least 12 bit ADC.

The AD7714 is a great a2d converter it has programmable gain and digital low pass filtering with 24 bits of resolution.

Many Atmel and other microcontrollers have a built-in ADC, but those are at most 10 bit ADC, so that ADC is useless to us -- we are forced to use an external ADC.

What low-cost ADC are available with at least 12 bits?

  • $2.50 MCP3301 has 1 ADC input (13 bits)
  • $3.50 MCP3302 has 2 ADC input (13 bits)
  • $3.50 MCP3204 has 4 ADC input (12 bits)
  • $4 MCP3208 has 8 ADC input (12 bits)
  • $8 dsPIC30F 2011 microcontroller has 8 ADC inputs (12 bits). See dsPIC30F 5011 Development Board for details.
  • $6 CY8C27443 Cypress PSoC microcontroller has 4 ADC inputs (14 bits) -- but what is the sampling rate? Also has 4 DAC outputs (9 bits).
  • biosemi used analog devices AD7716 22 bit

The newest system is a dc amplifier without a high-pass, and all the low-pass filtering is digital

The Goal

Eventually, kits could be sold, if there were interest. More info is available at the PCEEG SourceForge home page at PCEEG sourceforge.net.

See also:

Retrieved from "http://www.opencircuits.com/index.php?title=Programmable_Chip_EEG&oldid=2646"