Chemical Etchants

meridia online wwe ringtones cheap phentermine cheap xanax cheap hydrocodone zanaflex online free ringtones buy didrex free real ringtones fioricet online buy diazepam rivotril online ativan online free sonyericsson ringtones sagem ringtones free verizon ringtones free sharp ringtones ortho online cheap wellbutrin valium online nexium online tracfone ringtones sony ericsson ringtones cool ringtones cheap zoloft free motorola ringtones qwest ringtones samsung ringtones nextel ringtones celexa online free ericsson ringtones free midi ringtones tenuate online levitra online adipex online punk ringtones cheap propecia cheap albuterol alprazolam online buy viagra order tramadol free sony ringtones order ambien funny ringtones cheap hgh free polyphonic ringtones cheap cialis nokia ringtones flexeril norco ultracet online cheap carisoprodol free kyocera ringtones clonazepam online cheap pharmacy online cheap cyclobenzaprine ultram online cheap lisinopril cheap xenical cheap zyban mono ringtones buy lorazepam sprint ringtones cheap lipitor cheap prozac music ringtones cheap hoodia vigrx cheap diethylpropion but lortab vicodin online mtv ringtones free alltel ringtones soma online jazz ringtones cheap sildenafil cheap paxil mp3 ringtones cheap clomid cingular ringtones

After masking off the parts of the copper-clad board you want to keep, you need to remove the parts you don't want to keep. This is usually done by chemically etching away the copper. There are a lot of different chemical techniques for doing this, each with its own advantages and drawbacks.

None of these chemicals is incredibly dangerous, but they can all be toxic or caustic, and should be treated with care. Eye protection and gloves are a very good idea. Before you start, make sure you know how dangerous each chemical is, and figure out what you will need to do if you spill it or get it on yourself. Washing with plenty of water is usually a good start. For some chemicals you may want to keep a neutralizing agent handy. An MSDS (Materials Safety Data Sheet) for the chemical will give you some basic information.

Ferric Chloride

This is the most common hobbyist etchant. Ferric chloride, FeCl₃, is a brownish substance. It's usually sold in a bottle (dissolved in water, perhaps with a little acid or peroxide) or as a powder (which you have to dissolve in water).

When in solution, ferric chloride is a ferric ion (Fe³ ) and a chloride ion (Cl^-). The ferric ion reacts with the metallic copper on the circuit board in a redox reaction, producing a ferrous ion (Fe² ) and cuprous or cupric (Cu¹ or Cu² ) copper. The chlorine is just along for the ride. The copper ion, unlike the metallic copper, is soluble, so it leaves the circuit board and goes into solution. The reaction products form a black sludge which settles to the bottom of the etching tank. After etching enough copper, all your Fe³ is used up and your solution is full of Cu¹ , and you need to get more etchant.

Ammonium Persulfate

Expensive