Difference between revisions of "Linuxstamp Mboard 1"
Jump to navigation
Jump to search
Linuxvolts (talk | contribs) |
|||
| Line 31: | Line 31: | ||
== Links == | == Links == | ||
* Back to the [http://opencircuits.com/linuxstamp linuxstamp] | * Back to the [http://opencircuits.com/linuxstamp linuxstamp] | ||
| + | |||
| + | [[Category:Projects]] | ||
Revision as of 06:00, 24 June 2007
Contents
Introduction
This project is purely in the planning stages. There are no designs available. It is meant to be a brainstorming area. Feel free to add possible vendors.
Sensor wish list
- A/D converter with selectable ranges
- 3-axis accelerometer
- Temperature sensor
- Pressure sensor
- GPS module
Communication wish list
- 802.11b/g interface
- Sychip wifi module. The drivers aren't on the webpage. I don't know if you can get them GPL.
- NXP wifi SiP. Again I don't know about the drivers
- Zigbee interface
- 900Mhz radio
Power supply
- POE frontend
- +/- 15v for +/- voltage signal conditioning and for LEM current sensors
- +5v for the linuxstamp
AVR slave
A dedicated slave processor could be helpful for many things. The main function I have in mind now is PWM outputs for servo control. I think an AVR could even be programmed through the SPI port of the AT91RM9200 (some hacking may be needed to make that work). Even if you can't programm the AVR through the AT91RM9200, it can still be an SPI slave device.
- PWM output with standard servo headers
- Counting/Frequency inputs
Links
- Back to the linuxstamp
