Difference between revisions of "Linuxstamp"
Jump to navigation
Jump to search
Linuxvolts (talk | contribs) |
Linuxvolts (talk | contribs) |
||
| Line 15: | Line 15: | ||
== Project files == | == Project files == | ||
| − | |||
[[Media:at91-rev1.1.0-top.pdf|PCB Top view (pdf)]]<br> | [[Media:at91-rev1.1.0-top.pdf|PCB Top view (pdf)]]<br> | ||
[[Media:at91-rev1.1.0-bottom.pdf|PCB Bottom view (pdf)]]<br> | [[Media:at91-rev1.1.0-bottom.pdf|PCB Bottom view (pdf)]]<br> | ||
Revision as of 08:34, 16 April 2007
Description
The Linuxstamp is designed to be a general purpose processor module. It is designed to work as a stand alone module (SD card, ethernet and USB/Serial converter are all on the module). This allows all initial development to be done without a motherboard, but for integration into a specific project a motherboard with specific features could be designed.
Features
-Atmel AT91RM9200 processor (Arm9 processor with MMU)
-32Mb SDRAM (Only limited by 1x 54-TSOP SDRAM chip)
-8Mb SPI Dataflash
-1x 10/100 Ethernet
-1x USB host port
-1x SD card slot
-Serial debug port access through
Licence
All files for this project are lecenced under the GNU GPL V2
Project files
PCB Top view (pdf)
PCB Bottom view (pdf)
Schematic (pdf)
