Difference between revisions of "SFE Footprint Library Eagle"

From OpenCircuits
Jump to navigation Jump to search
(clarify (I hope))
(Added workaround for bad ATTinyX5 footprint.)
Line 24: Line 24:
 
*[http://www.sparkfun.com/commerce/product_info.php?products_id=9308 Blackberry Trackball] - Small magneto trackball
 
*[http://www.sparkfun.com/commerce/product_info.php?products_id=9308 Blackberry Trackball] - Small magneto trackball
 
Errors:
 
Errors:
−
* The ATtiny45 device in this 7-28-09 library has an incorrect mapping between pins and pads. Please use some other library for this part.
+
* The ATtiny45 device in this 7-28-09 library has an incorrect mapping between pins and pads. Please use some other library for this part.  You may also fix your pin-pad mapping using the "connections" tool in the Eagle library editor.  The most significant error is that pin 1 is GND and pin 4 is RESET in the library - real ATTinyX5s have pin 1 as RESET and pin 4 as GND.
  
 
----
 
----

Revision as of 09:31, 28 January 2010

Spark Fun Electronics' preferred foot prints. We've spent an enormous amount of time creating and checking these footprints and parts. If you enjoy using this library, please buy one of our products at http://www.sparkfun.com. Please also note that we guarantee that there are some messed up footprints in this library. We've tried to note which are proven and tested but by downloading this file, you acknowledge that you are using this file at your own risk. We cannot be held responsible for faulty PCBs. Always check your parts against a 1:1 printout.

Licensing: CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.

This is the complete Spark Fun Electronics default foot prints for Eagle. We switched to Eagle back in 2006 and have been extremely impressed with its ease of use and flexibility. As with any new software, it's like learning a new language and takes time. Do it. Eagle is great. If you need more information about how to use Eagle, checkout our Eagle Tutorials.

Here is a link to the SparkFun Eagle Library dated November 3rd 2009. 415 current devices. 603 footprints. New parts worth noting:

Here is a link to the SparkFun Eagle Library dated July 28th 2009. 356 current devices. 540 footprints. New parts worth noting:

Errors:

  • The ATtiny45 device in this 7-28-09 library has an incorrect mapping between pins and pads. Please use some other library for this part. You may also fix your pin-pad mapping using the "connections" tool in the Eagle library editor. The most significant error is that pin 1 is GND and pin 4 is RESET in the library - real ATTinyX5s have pin 1 as RESET and pin 4 as GND.

Here is a link to the SparkFun Eagle Library dated March 30th 2009. 320 current devices. New parts worth noting:

  • Venus GPS - Venus GPS Receiver
  • New Creative Commons License

Here is a link to the SparkFun Eagle Library dated January 8th 2009. 284 current devices. New parts worth noting:

Here is a link to the SparkFun Eagle Library dated October 6th 2008. 276 current devices. New parts worth noting:

Here is a link to the SparkFun Eagle Library dated February 20th 2008. 197 current devices. New parts worth noting:

Here is a link to the SFE Eagle Library dated June 6th 2007. 164 current devices. New parts worth noting:

Here is a link to the SFE Eagle Library dated March 2nd 2007. 132 current devices. Some worth noting:

Et al.


related

Retrieved from "http://www.opencircuits.com/index.php?title=SFE_Footprint_Library_Eagle&oldid=19197"