Difference between revisions of "Wirewrap"
Jump to navigation
Jump to search
(FIELD_OTHER) |
m (Reverted edits by 198.83.124.250 (Talk); changed back to last version by DavidCary) |
||
| Line 1: | Line 1: | ||
| − | + | Wire-wrapping is a method of wiring through-hole components together on a board. | |
| + | It is usually used only for prototyping. | ||
| + | |||
| + | A manual wire-wrap tool is cylindrical with one large on-axis hole (for the pin to be connected) and an off-axis hole (for the wire - usually 30 gauge). | ||
| + | Rotating this tool leaves a tightly-wound helix of wire on the pin. | ||
| + | There are also powered tools with motors that work the same way. | ||
| + | |||
| + | Wirewrap is one of several circuit construction [[techniques]]. | ||
| + | |||
| + | |||
| + | [[Category:Techniques]] | ||
Revision as of 10:23, 16 December 2008
Wire-wrapping is a method of wiring through-hole components together on a board. It is usually used only for prototyping.
A manual wire-wrap tool is cylindrical with one large on-axis hole (for the pin to be connected) and an off-axis hole (for the wire - usually 30 gauge). Rotating this tool leaves a tightly-wound helix of wire on the pin. There are also powered tools with motors that work the same way.
Wirewrap is one of several circuit construction techniques.
