Difference between revisions of "Minimig Board v1.1 documentation"
Jump to navigation
Jump to search
(short description with images) |
(layout) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 11: | Line 11: | ||
|} | |} | ||
| − | * SD/MMC | + | :J9 - Spare I/O, User3 has been replaced with SPI_DOUT. |
| − | + | ||
| + | * R49 located in series between "SPI_DOUT" and SD/MMC "D0" has been decreased from 1000Ω to 100Ω for better MMC-Card compatibility. | ||
* The PS/2 connectors are now properly connected to the frame ground. | * The PS/2 connectors are now properly connected to the frame ground. | ||
| Line 18: | Line 19: | ||
:J8 - pin7,pin8,pin9 wired to "FRAME1" | :J8 - pin7,pin8,pin9 wired to "FRAME1" | ||
| − | * The bottom silk screen has been cleaned up and added to the gerber file set. Minimig rev1.1 is 100% core and firmware compatible with the rev1.0 PCB. | + | * The bottom silk screen has been cleaned up and added to the gerber file set. Minimig rev1.1 is 100% core and firmware compatible with the rev1.0 PCB. |
| + | |||
| + | |||
| + | There are still issues remaining, see [[Minimig Board v1.0 issues]]. | ||
Latest revision as of 16:27, 26 August 2007
- The wire patch needed for rev1.0 to work is now incorporated into the layout. So, rev1.1 doesn't need a single wire patch.
Pin FPGA Name v1.0 Assignment v1.1 Assignment Comment 19 IO_7 User3 SPI_DOUT 79 IO_4/GCLK0 RAM_A15 RAM_A15 81 IO_4/DOUT SPI_DOUT NC
- J9 - Spare I/O, User3 has been replaced with SPI_DOUT.
- R49 located in series between "SPI_DOUT" and SD/MMC "D0" has been decreased from 1000Ω to 100Ω for better MMC-Card compatibility.
- The PS/2 connectors are now properly connected to the frame ground.
- J5 - pin7,pin8,pin9 wired to "FRAME1"
- J8 - pin7,pin8,pin9 wired to "FRAME1"
- The bottom silk screen has been cleaned up and added to the gerber file set. Minimig rev1.1 is 100% core and firmware compatible with the rev1.0 PCB.
There are still issues remaining, see Minimig Board v1.0 issues.
