Difference between revisions of "Das Brewmeister!"
(one wire) |
|||
| (3 intermediate revisions by 3 users not shown) | |||
| Line 7: | Line 7: | ||
===Project Scope=== | ===Project Scope=== | ||
| − | <b>Description:</b><br> This is an attempt to mimic the control systems used in | + | <b>Description:</b><br> This is an attempt to mimic the control systems used in commercial brewing of beer. It has been done before with some external hardware and a refrigerator + heat lamp see: |
http://www.blug.linux.no/files/presentations/freebeer/paper.pdf | http://www.blug.linux.no/files/presentations/freebeer/paper.pdf | ||
| − | My approach would be similar I think I may be able to get by with modifications to Spark Fun's toaster controller and a "cluged" together wireless temp sensor. I have prototyped in a breadboard a 16F88 with the DS18S20 one wire digital temperature sensor and one of Spark Fun's old Smirf's. Proto board passes data fine, even wrote a quick VB program to dump data in to Access for later. | + | My approach would be similar I think I may be able to get by with modifications to Spark Fun's toaster controller and a "cluged" together wireless temp sensor. I have prototyped in a breadboard a 16F88 with the DS18S20 [[one wire]] digital temperature sensor and one of Spark Fun's old Smirf's. Proto board passes data fine, even wrote a quick VB program to dump data in to Access for later. |
---- | ---- | ||
===PCB Conversion=== | ===PCB Conversion=== | ||
| − | I thought that the conversion would be relatively simple. Just take what I had and draw, right? I used the free Eagle setup and dumped everything to BatchPCB.com. A problem arose from changing to SMDs and trying to cut too many corners. I found out that the SMD voltage regulator I had put on the new PCB required a capacitor on the | + | I thought that the conversion would be relatively simple. Just take what I had and draw, right? I used the free Eagle setup and dumped everything to BatchPCB.com ([[PCB Manufacturers#BatchPCB]]). A problem arose from changing to SMDs and trying to cut too many corners. I found out, after I had assembled a board, got bizarre voltage readings and no response from the pic,that the SMD voltage regulator I had put on the new PCB required a capacitor on the output. I wanted to keep the components to a minimum and didn't include everything from the prototype when I drew up the design. I will be more aware next time. |
---- | ---- | ||
===Coming Later?=== | ===Coming Later?=== | ||
I hope to have the new PCB in the next few weeks and if everything goes well I begin to look more closely at the reflow controller and procurement of a refrigerator. Meantime I need to find the time to actually begin brewing some beer! | I hope to have the new PCB in the next few weeks and if everything goes well I begin to look more closely at the reflow controller and procurement of a refrigerator. Meantime I need to find the time to actually begin brewing some beer! | ||
| + | |||
| + | Finally got something together at http://seidle.blogspot.com/ not really the project originally described but may be of interest none the less. | ||
---- | ---- | ||
Latest revision as of 08:06, 31 October 2014
Project Scope[edit]
Description:
This is an attempt to mimic the control systems used in commercial brewing of beer. It has been done before with some external hardware and a refrigerator + heat lamp see:
http://www.blug.linux.no/files/presentations/freebeer/paper.pdf
My approach would be similar I think I may be able to get by with modifications to Spark Fun's toaster controller and a "cluged" together wireless temp sensor. I have prototyped in a breadboard a 16F88 with the DS18S20 one wire digital temperature sensor and one of Spark Fun's old Smirf's. Proto board passes data fine, even wrote a quick VB program to dump data in to Access for later.
PCB Conversion[edit]
I thought that the conversion would be relatively simple. Just take what I had and draw, right? I used the free Eagle setup and dumped everything to BatchPCB.com (PCB Manufacturers#BatchPCB). A problem arose from changing to SMDs and trying to cut too many corners. I found out, after I had assembled a board, got bizarre voltage readings and no response from the pic,that the SMD voltage regulator I had put on the new PCB required a capacitor on the output. I wanted to keep the components to a minimum and didn't include everything from the prototype when I drew up the design. I will be more aware next time.
Coming Later?[edit]
I hope to have the new PCB in the next few weeks and if everything goes well I begin to look more closely at the reflow controller and procurement of a refrigerator. Meantime I need to find the time to actually begin brewing some beer!
Finally got something together at http://seidle.blogspot.com/ not really the project originally described but may be of interest none the less.
