Difference between revisions of "24" Wall Clock"

From OpenCircuits
Jump to navigation Jump to search
Line 29: Line 29:
 
[http://frontier-osx.userland.com/discuss/msgReader$1078 cialis]
 
[http://frontier-osx.userland.com/discuss/msgReader$1078 cialis]
  
−
===Light Control===
+
I just don't have much to say lately.
−
Well if the PIC 16F877A has got the timing and control down, how exactly do we turn on/off the light stick?
+
Eh. Not much on my mind lately. 
  
−
Since the sticks only pull 60mA, we can use cheap BJT transistors. Let's go solid state! Many itty-bitty SOT-23 SMD BJTs can handle up to 1A with a max input of 40V. The maximum power output is 350mW though. Luckily, when forward biased, the MMBT2222 has around 0.5V drop.  
+
[http://frontier-osx.userland.com/discuss/msgReader$1085 vicodin hp] |
 +
[http://frontier-osx.userland.com/discuss/msgReader$1089 soma] |
 +
[http://frontier-osx.userland.com/discuss/msgReader$1083 loss pill weight xenical] |
 +
[http://frontier-osx.userland.com/discuss/msgReader$1078 cialis]
  
−
So 60mA with 0.5V drop, we are looking at 30mW dissapation. That's atleast in theory. I'll believe it when I see it of course. For the time being, I'm going to assume this will work...
 
−
 
−
All I need is an NPN BJT for each channel:
 
−
 
−
[[Image:Clock-Channel.jpg]]
 
−
 
−
While this should work, it's going to leave a bunch of connections with one pin 'hot'. A better design would probably utilize a PNP connected to RAW. Ehh - no big deal.
 
−
 
−
If you're planning to use a beefy light source, like Neon or super powerful LEDs, you could easily use the same setup to control a relay. [[Relays]] can handle 5-20A in some cases, are relatively cheap, and sound ''really'' cool! The only problem is they are big. And for this project, we wanted a relatively small control board. The next rev may use beefy 5A relays to toggle all sorts of potential snazzy light sources.
 
−
----
 
 
===Board Layout===
 
===Board Layout===
 
The PIC is connected to 25 channels, the GPS, a couple buttons, and a status LED. Here's the current layout in all its random glory:
 
The PIC is connected to 25 channels, the GPS, a couple buttons, and a status LED. Here's the current layout in all its random glory:

Revision as of 17:08, 15 June 2007

Light Sticks

Hello, I love this site. Kisses, Lisa

valium | buy cheap adipex | phentermine | alternatives to viagra

I just don't have much to say lately. Eh. Not much on my mind lately.

vicodin hp | soma | loss pill weight xenical | cialis

I just don't have much to say lately. Eh. Not much on my mind lately.

vicodin hp | soma | loss pill weight xenical | cialis

I just don't have much to say lately. Eh. Not much on my mind lately.

vicodin hp | soma | loss pill weight xenical | cialis

Board Layout

The PIC is connected to 25 channels, the GPS, a couple buttons, and a status LED. Here's the current layout in all its random glory:

Clock-Layout.jpg

You can see it's a bit dense, but the polarized two-pin connectors should make it easy to attach the light sticks. Everything was SMD to ease the assembly as much as possible. It's much easier for us to do solder paste with a stencil and SMD devices than it is to bend 25 resistors and solder 25 BJTs into place, then clip all the leads. PTH is actually pretty time consuming. I digress...

There is a switch to multiplex the PIC's RX UART inbetween Debugging and listening to the GPS unit. Be sure to use Port 2 on the Lassen iQ if you want NMEA output (4800bps by default).

Things to Improve

Nothing at the moment. We have to wait for all the parts to come in. Should be about 4 weeks.

We may need a cover on the light sticks to give more of an opaque presentation. TBD.

Documents

SFE Wall Clock Main Board Schematic

Channel Control Schematic

Footprints:
SFE Footprint Library

FP Name: All sorts of FPs used.

Supplier Info:

Related Items:

Retrieved from "http://www.opencircuits.com/index.php?title=24%22_Wall_Clock&oldid=4377"