Difference between revisions of "Linuxstamp"
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
== Licence == | == Licence == | ||
| − | All files for this project are | + | All files for this project are licensed under the GNU GPL V2 |
== Project files == | == Project files == | ||
Revision as of 11:28, 16 April 2007
Description
The Linuxstamp is designed to be a general purpose processor module. It is designed to work as a stand alone module (SD card, ethernet and USB/Serial converter are all on the module). This allows all initial development to be done without a motherboard, but for integration into a specific project a motherboard with specific features could be designed.
Features
-Atmel AT91RM9200 processor (Arm9 processor with MMU)
-32Mb SDRAM (Only limited by 1x 54-TSOP SDRAM chip)
-8Mb SPI Dataflash
-1x 10/100 Ethernet
-1x USB host port
-1x SD card slot
-Serial debug port access through FTDI USB/Serial converter
Licence
All files for this project are licensed under the GNU GPL V2
Project files
PCB Top view (pdf)
PCB Bottom view (pdf)
Schematic (pdf)
