View source for FreeCad .17 Examples

== Introduction ==

This is a useless page, soon to be deleted.

*[[FreeCad: Using Example Models]]



*[[FreeCad .17 Example PartDesignPrimitives]]


* D:\Russ\0000\FreeCad\Point17\HoleInCyl_1.FCStd   use part design with a cylinder from part, map to top face, hole moves with the cyl.  
* D:\Russ\0000\FreeCad\Point17\HoleInCyl_2.FCStd   same as HoleInCyl_1 but done in freecad .16 open in .17 and compare to HoleInCyl_1
[[Category:FreeCad]]