OpenCircuits - User contributions [en]

Minimig SD-card compatibility

2009-01-16T00:40:04Z

Kopencirc:

{| class="wikitable"
|-
! colspan="5" align="center" | Tested SD-Cards
|-
! Manufacturer !! Model !! Size !! Works !! Comment
|-
| Kingston || SD || 1 GB || Yes ||
|-
| Kingston || SD/2GBKR || 2 GB || Yes || Works fine
|-
| Kingston || SD 50x || 2 GB || Yes ||
|-
| Kingston || MMC || 128 MB || No || Not detected by Minimig
|-
| PNY || SDHC || 4 GB || No || Six flashes: not recognized
|-
| Sandisk || Ultra II || 1GB || Yes ||
|-
| Sandisk || MMC || 1 GB || Yes || Noticeably slower than other cards
|-
| Transcend || N/A || 1 GB || Yes ||
|-
| Ultra || SD || 2 GB || Yes ||
|-
| UnityDigital || N/A || 1 GB || Yes ||
|-
| Memory Master || SD || 2 GB || Yes ||
|-
| takeMS || MMC || 1 GB || Yes || Very low data transfer rate in Minimig
|-
| Sandisk || microSD || 128 MB || Yes || A bit slower then generic SD
|-
| Sandisk || microSD || 256 MB || Yes || As above
|-
| Sandisk || microSD || 1 GB || Yes || As above
|-
| Goodram || SD || 1 GB || Yes || Works
|-
| eXagerate || MMC || 128MB || No || Not detected
|-
|}

Amiga floppy project

2007-01-23T15:53:54Z

Kopencirc:

== Amiga Floppy Project ==

This project is the building of an external USB amiga floppy drive controller. It sits between the USB port on a Windows PC, and a regular PC floppy drive. It will allow the PC to create .ADF images from an amiga floppy disk. This device is based on a Parallax SX28 microcontroller, uses Ramtron FRAM memory for temporary track storage, and uses another Parallax component for the USB interface.

[[Image:AFPimage.jpg]]

'''Links'''

[http://www.techtravels.org/amiga/amigablog Main Project Blog]

[http://www.parallax.com/sx/index.asp Parallax SX Microcontroller]

[http://www.ramtron.com/doc/Products/Nonvolatile/Detail.asp?ID=30&gr=5 Ramtron Serial FRAM]

Amiga floppy project

2007-01-23T15:53:38Z

Kopencirc:

== Amiga Floppy Project ==

This project is the building of an external USB amiga floppy drive controller. It sits between the USB port on a Windows PC, and a regular PC floppy drive. It will allow the PC to create .ADF images from an amiga floppy disk. This device is based on a Parallax SX28 microcontroller, uses Ramtron FRAM memory for temporary track storage, and uses another Parallax component for the USB interface.

[[Image:AFPimage.jpg]]

'''Links'''

[http://www.techtravels.org/amiga/amigablog Main Project Blog]
[http://www.parallax.com/sx/index.asp Parallax SX Microcontroller]
[http://www.ramtron.com/doc/Products/Nonvolatile/Detail.asp?ID=30&gr=5 Ramtron Serial FRAM]

Amiga floppy project

2007-01-23T15:44:11Z

Kopencirc:

== Amiga Floppy Project ==

[[Image:AFPimage.jpg]]

This project is the building of an external USB amiga floppy drive controller. It sits between the USB port on a Windows PC, and a regular PC floppy drive. It will allow the PC to create .ADF images from an amiga floppy disk. This device is based on a Parallax SX28 microcontroller, uses Ramtron FRAM memory for temporary track storage, and uses another Parallax component for the USB interface.

File:AFPimage.jpg

2007-01-23T15:43:13Z

Kopencirc: